Bushing for SRAM Full Mount/UDH Round, Rear Dropout: Choose Size/Material

Product Details

• Materials:
  • 6/4 titanium
  • 303 stainless steel
• Styles:
  • Concentric, 0 mm
    • No external markings
  • Eccentric, 0.5 mm
    
    • • Four 2.2 mm radial holes on the flange
      • Use a 2 mm hex key to rotate the insert, using the radial holes on the flange
  • Eccentric, 1.0 mm
    
    • Four 2.2 mm radial holes on the flange
    • Single identification groove on the 24 mm diameter
    • Use a 2 mm hex key to rotate the insert, using the radial holes on the flange
• Application:
  • Fits the right side of our titanium SRAM Full Mount/UDH eccentric round, rear dropouts
  • Allows for fine tuning wheel alignment in the frame following frame construction
  • The insert:
    • Must be welded (titanium) or silver soldered in (stainless steel)
    • Once installed is not meant to be consumer serviced
    • Is a structural part of the assembly

Item sold individually.