We've added two new options to our line of titanium dropouts that are compatible with the SRAM Full Mount/UDH system.
Our first new release (above) has a 140mm integrated brake mount (160 with adapter) on the non-drive side, giving frame builders more options for building with the UDH system. The drive side has a 1-3/4" OD and is available in concentric (DR0078, 0 mm offset) and eccentric (DR0079, 0.5 mm & 1 mm offset) styles, allowing for precision wheel alignment in any circumstance. We emphasized the refinement and aesthetics of this dropout, intending it for broader use across many styles of frames.
Our second release has a left side frame component with a weld-on flat mount brake insert intended for 140 mm rotors (160 with adapter). The chain stay tab is extra-long to allow for clearance of 1" stays if needed. The frame builder can simply cut off the excess if building with 7/8 stays. The right frame component has a 1-3/4" OD and allows for rack mounting with eyelets (DR0104) or without eyelets (DR0105). This dropout will be offered in titanium only. See our DR2102/DR2104 for a similar design in steel.
Don't know which one to choose? You can't go wrong! Both styles are sleek with a low profile, meet all of SRAMS specs, and integrate beautifully into a frame. As always, please reach out with any questions you might have.