We've had a lot of people ask if our https://www.paragonmachineworks.com/dropouts/sram-udh/sram-full-mount-udh-flat-post-mount-dropout-choose-material.html will work with the "road version of the SRAM T-Type" or what SRAM refers to as their Full Mount rear derailleur. The good news? We thought the answer was no but we were wrong! Here's the latest, directly from SRAM:
"The interface for a full mount rear derailleur is the same for MTB and Road. The clearance model is the same for both with the exception that the Road has an added clearance surface (see image below). The surface is called "Road AXS RD on UDH hanger" (see red arrow). Basically, this surface represents the worst case scenario for a specific combination of Road RD's with certain cassette sizes when used on a UDH hanger. Those combinations are a 36T Max RD with a 10-28T cassette or a 44T Max RD with a 10-36T cassette. During these two combinations, the RD is represented with this surface. Any other combination is ok and also full mount RD are ok and not relevant to this surface. "
