Stem Parts

Materials

• 4130 steel
• 6/4 titanium

ID: 1-1/4" (31.8 mm)

Width: 1-1/2"

Complimentary Parts: Shims are available for 7/8" handlebars in a variety of colors, purchase here

6/4 Titanium

• ID sizes: 1-1/4" and 35 mm
• Back has a 3" diameter for mitering of 1-1/8" or 1-1/4" diameter extensions
• 1-1/4" back stem plate has an "X" pattern cutout through the plate to minimize distortion and reduce weight

1018 Steel

• ID:  1-1/4"
• Back has a 1-1/8" diameter counterbore to accept a square-cut extension
  • 1-1/4" extensions will work if they are mitered 3" diameter
• No cutout to keep water from getting in the extension
• Must be vented through the steerer clamp to avoid water intrusion

Material

6061 aluminum

• Tumble-finished
• Black anodized 6061

Hardware

• Supplied with four M5 x .8 x 16 zinc-plated steel socket head cap screws

Important!

Designed to fit our steel and titanium back plates only

Price: $3 per piece

Minimum Order Quantity: 50 pieces

Set-Up Charge

One-time $125.00 charge to convert your logo to machine code if you provide us with a .dfx file of your logo

One-time $250.00 charge to convert your logo to machine code if you don't have a .dfx file of your logo

• Please keep your design simple and clean for best results

Request a Quote: Email orders(at)paragonmachineworks.com

Deposit

• A 50% non-refundable deposit is required prior to start of production
• The balance is due upon shipment or at pick up

Fabrication

The crown race diameter must be turned down to the final dimension after fabrication to help eliminate distortion during welding.